How to Install Chandelier Yourself on Ceiling with Full Safety

Learn how to safely install a chandelier on your ceiling with this easy step-by-step guide.

How to Install Chandelier on Ceiling

A chandelier can easily make a room luxurious. Keep the tools needed to install a chandelier: screwdriver, moi, voltage tester, pliers, wire stripper handy. Turn off the power to the fixture at the breaker box. If there are old fixtures, remove them. Then refer to the manufacturer’s instructions and act accordingly.

Table of Contents

What You'll Need

Equipment / Tools

  • Chandelier
  • Ceiling medallion (optional)
  • Ladder
  • Stud finder
  • Electric drill
  • Screwdriver (flathead and Phillips)
  • Wire nuts
  • Electrical tape
  • Wire cutter/stripper
  • Ceiling electrical box and mounting hardware
  • Chain or support cable (if needed)
  • Safety goggles
  • Gloves
  • Helper (optional)


1. Measure and Plan

You determine the exact height distance measurement of your desired chandelier. Typically the height of a chandelier is about 30 to 36 inches above the dining table and 7 feet above the floor.

2. Locate Ceiling Joists

Use the stud finder to locate the ceiling joists. Ensure the stability and safety of the chandelier by using it.

3. Install Mounting Bracket

A mounting bracket is provided with the chandelier. Mount securely to the ceiling joist using screws. Next align the chandelier. Check to see if the brackets are level to avoid any problems.

4. Assemble the Chandelier

Assemble the flashlight according to the manufacturer’s instructions. Arms, wires, and canopies are made. Make sure the content is in place to read with time.

5. Wire the Chandelier

Thread the chandelier wires under the canopy and mounting bracket Then connect the chandelier wires to the electrical wires

6. Secure the Chandelier

Once the wiring is complete, lift the chandelier and hang it from the bracket. Refer to manufacturer’s instructions to ensure safe installation.

7. Test the Connections

Before starting the chandelier, do a few checks. Make sure the voltages are all working properly. Because security determines effectiveness.

8. Adjust Height and Balance

Make sure the chandelier is properly placed, height adjusted, hanging straight. Check the chandelier by lengthening or shortening the chain or rod if necessary.

9. Clean Up

After placing the chandelier of your choice, wipe it down thoroughly. Then remove the packaging materials. Clean the room thoroughly.

10. Enjoy Your New Chandelier

Chandeliers add charm to any room. Now you appreciate your handiwork and enjoy the aesthetic ambiance of the chandelier.

What Security should be Taken to Install High Ceiling Chandeliers

7 tips for installing high ceiling chandeliers

Follow these 7 essential tips for installing high ceiling chandeliers. Which will suggest you easy install with securit

Turn Off Power

Before starting any electrical work, always turn off the power at the breaker box. As a result there will be no risk of electric shock or short circuit.

Use a Sturdy Ladder or Scaffol

For working on high ceilings, get a long and sturdy ladder or scaffolding with a flat surface. Then do the sealing work using it properly.

Wear Personal Protective Equipment (PPE)

For your safety you should wear safety shoes and gloves. As a result, you can protect your hands from sharp or electrical components.

Verify Ceiling Joist Location

Before installing the chandelier Before mounting the chandelier, check the ceiling joists. Install ceiling joists if the chandelier provides support and stability to hold the chandelier. And otherwise refrain from installing if there are any errors.

Check Weight Capacity

Be sure about the bearing capacity of the ceiling. Otherwise, the weight of your decorative chandelier can support the ceiling, the safety risk remains.

Follow Manufacturer's Instructions

Follow the manufacturer’s instructions whenever necessary when installing the chandelier. Through this you will know about the safety of connecting the chandelier properly.

Secure Wiring Properly

Connect the chandelier wire and ceiling wire. Can be securely attached with nuts. Make sure there are no exposed wires nearby Remove unnecessary cables.

How should the Size of the Chandelier According to the Height of the Ceiling

It is very important to select the size and weight of the chandelier according to the height of the ceiling. Because if the chandelier is not suitable, the room will look incongruous. Here are some general tips to follow.

Low Ceilings (8 feet or less)

You choose small chandeliers for your low ceiling. Flush-mount or semi-flush-mount fixtures work well for adequate lighting.

Standard Ceilings (8-10 feet)

Choose a 20-24 inch chandelier fixture for the dining room or foyer. This standard ceiling chandelier will match the rest of the furniture in your room.

High Ceilings (10 feet or more)

If your room’s ceilings are 10 feet or higher, choose multi-tiered or statement chandeliers that are 30 inches or larger. These types of chandeliers for high ceilings make the rooms more attractive and luxurious.


Choose a spot for the chandelier that will provide enough light and also match the rest of your room’s decor. And choose a chandelier that supports the weight of your chandelier ceiling.

Chandeliers are installed in different ways on different types of ceilings. Because the material and structure of the ceiling is different. For example: drywall, plaster and suspended ceilings.

You can easily determine if the ceiling can support the weight of the chandelier by checking the manufacturer’s instructions. Or you can consult chandelier installation experts.

After installation you can easily adjust the height of the chandelier with an adjustable chain or rod. Or follow the manufacturer’s instructions for your desired height.

Installing the chandelier yourself requires electrical knowledge and skill or you run the risk of a short circuit. Safety should always be a top priority. So if you are unsure about any aspect of installation, consult a good professional.